KEMPER ThermoSystem
|KTS Water Heater
KTS water heater (S) PRO, full stainless steel, Single unit S, 42 l/min
Item number 9251000100 Dimensions including packaging 660 x 520 x 330 mm; 20 kg
€4,584.96 / Pcs
Tender text
KEMPER KTS water heater (S) PRO, full
stainless steel, figure 925 10, as a
central domestic hot water heater
according to the continuous flow
principle, welded stainless steel plate
heat exchanger, for hygienic supply of
hot water and hot water circulation
according to latest standards, wetted
parts on the drinking water side made of
gunmetal, stainless steel and drinking
water approved plastics, plate heat
exchanger made of stainless steel grade
1.4401/1.4404, includes thermal
disinfection option according to DVGW W
551, integrated pump for primary side
(heating), pulse train controlled pump,
lime scale protection due to patented
tilted position of plate heat exchanger,
to control hot water heating and
reloading of buffer tank, wetted parts
on the heating side made of gunmetal,
stainless steel, cast grey iron and
brass, includes option to compensate for
offset in walls, insulating shell made
of EPP with separated hot and cold areas
to avoid heat loads on the cold water
and protect the controller and pump
electronics from high temperatures, with
patented chimney effect to make
efficient use of the pump life, Adaptive
controller for high control quality,
includes two temperature sensors with 7
metres pipe length for mounting on the
buffer tank, standard BMS compatibility
via RS485 interface (Modbus-RTU),
includes 10 bar pressure relief valve
installed at factory, sample valve can
be retrofitted, flush point can be
integrated to avoid stagnation in the
cold-water pipe in the case of
interruptions in operation, Connection
to power supply with type F safety plug,
includes 32 GB data logger to fulfil
operator’s obligations, includes
commissioning wizard, includes
optimisation function with suggestion
for reducing the flow temperature to
save energy, includes sensor for
detecting the return temperature,
control range for 60GradC drinking water
from 2 K overtemperature, additional
sensors can be connected for detecting
the cold water and circulation entry
temperature, Adjustable hot water
temperature for pipework contents < 3 l
up to 20GradC possible, with the option
of BACNet connection, With the option of
assembly of the direct DHW station on
the buffer tank, Direct DHW station for
small applications: Single unit 1.6-42
l/min, Plate heat exchanger with SVGW
certificate, according to UBA BWGL
Metals, building material class B2
according to DIN 4102, CE marking, VDE
declaration of conformity, RoHS
approval, adjustable temperature range
for PWH 20GradC to 70GradC, adjustable
temperature range for thermal
disinfection 70GradC to 90GradC, max.
operating temperature primary side 95
GradC, max. operating temperature
secondary side 80 GradC, max. working
pressure 1 MPa, given abstraction rates
at PWH = 60GradC with PWC = 10GradC and
water temperature in buffer tank =
80GradC, Water content per fresh water
station (heating side) Device S = 0.68
l, Water content per fresh water station
(drinking water side) Device S = 0.71 l
height: 639 mm width: 464 mm depth: 273 mm weight: 20.00 kg min. abstraction rate: 1.6 l/min max. abstraction rate: 42 l/min kv-value primary circle: 2.91 cbm/h kv-value secondary circle: 2.16 cbm/h output: 146 kW
height: 639 mm width: 464 mm depth: 273 mm weight: 20.00 kg min. abstraction rate: 1.6 l/min max. abstraction rate: 42 l/min kv-value primary circle: 2.91 cbm/h kv-value secondary circle: 2.16 cbm/h output: 146 kW
Technical data
Features
Minimal circulation volume flow 1.6 l/min
Maximum flow rate 42.0 l/min
Number of devices 1
Heat exchanger version Stainless steel
Connections
Inlet G 1
Outlet G 1
Inlet G 1
Outlet G 1
Performance curve
Performance curve is loading...
Documents
Technical documents
File type
Other
File type