KEMPER ThermoSystem
|KTS Water Heater
KTS water heater (S) PRO, copper-soldered, Single unit S, 42 l/min
Item number 9151000100 Dimensions including packaging 650 x 520 x 330 mm; 12.5 kg
€3,536.84 / Pcs
Tender text
KEMPER KTS water heater (S) PRO,
copper-soldered, figure 915 10, as a
central domestic hot water heater
according to the continuous flow
principle, copper soldered stainless
steel plate heat exchanger, includes
thermal disinfection option according to
DVGW W 551, integrated pump for primary
side (heating), pulse train controlled
pump, materials suitable for drinking
and heating water, lime scale protection
due to patented tilted position of plate
heat exchanger, to control hot water
heating and reloading of buffer tank,
for hygienic supply of hot water and hot
water circulation according to latest
standards, wetted parts on the drinking
water side made of gunmetal, stainless
steel and drinking water approved
plastics, wetted parts on the heating
side made of gunmetal, stainless steel,
cast grey iron and brass, plate heat
exchanger made of stainless steel grade
1.4401/1.4404, includes option to
compensate for offset in walls,
insulating shell made of EPP with
separated hot and cold areas to avoid
heat loads on the cold water and protect
the controller and pump electronics from
high temperatures, with patented chimney
effect to make efficient use of the pump
life, learnable control unit for
efficient operation, includes two
temperature sensors with 7 metres pipe
length for mounting on the buffer tank,
standard BMS compatibility via RS485
interface (Modbus-RTU), includes 10 bar
pressure relief valve installed at
factory, sample valve can be
retrofitted, flush point can be
integrated to avoid stagnation in the
cold-water pipe in the case of
interruptions in operation, Connection
to power supply with type F safety plug,
includes 32 GB data logger to fulfil
operator’s obligations, includes
commissioning wizard, includes
optimisation function with suggestion
for reducing the flow temperature to
save energy, includes sensor for
detecting the return temperature,
control range for 60GradC drinking water
from 2 K overtemperature, additional
sensors can be connected for detecting
the cold water and circulation entry
temperature, Adjustable hot water
temperature for pipework contents < 3 l
up to 20GradC possible, with the option
of BACNet connection, With the option of
assembly of the direct DHW station on
the buffer tank, Direct DHW station for
small applications: Single unit 1.6-42
l/min, Plate heat exchanger with SVGW
certificate, according to UBA BWGL
Metals, building material class B2
according to DIN 4102, CE marking, VDE
declaration of conformity, RoHS
approval, adjustable temperature range
for PWH 20GradC to 70GradC, adjustable
temperature range for thermal
disinfection 70GradC to 90GradC, max.
operating temperature primary side 95
GradC, max. operating temperature
secondary side 80 GradC, max. working
pressure 1 MPa, given abstraction rates
at PWH = 60GradC with PWC = 10GradC and
water temperature in buffer tank =
80GradC, Water content per fresh water
station (heating side) Device S = 0.68
l, Water content per fresh water station
(drinking water side) Device S = 0.71 l
height: 639 mm width: 464 mm depth: 273 mm weight: 12.50 kg min. abstraction rate: 1.6 l/min max. abstraction rate: 42 l/min kv-value primary circle: 2.91 cbm/h kv-value secondary circle: 2.16 cbm/h output: 146 kW
height: 639 mm width: 464 mm depth: 273 mm weight: 12.50 kg min. abstraction rate: 1.6 l/min max. abstraction rate: 42 l/min kv-value primary circle: 2.91 cbm/h kv-value secondary circle: 2.16 cbm/h output: 146 kW
Technical data
Features
Minimal circulation volume flow 1.6 l/min
Maximum flow rate 42.0 l/min
Number of devices 1
Heat exchanger version Copper
Connections
Inlet G 1
Outlet G 1
Inlet G 1
Outlet G 1
Performance curve
Performance curve is loading...
Documents
Technical documents
File type
Other
File type