KEMPER Hygiene System
|KHS CoolFlow
KHS CoolFlow Chiller
Item number 6180100100 Dimensions including packaging 1000 x 460 x 820 mm; 120 kg
€9,676.17 / Pcs
Nicht verfügbar 31.10.2026
Tender text
KEMPER KHS CoolFlow Chiller, figure 618
01, for cooling the KHS CoolFlow cold
water cooler, air-cooled chiller in
compact design for outdoor installation
for energy-efficient operation of the
KHS CoolFlow cold water circulation,
weatherproof base frame with removable
cladding panels made of powder-coated
steel, colour similar to RAL 9010, with
infinitely variable cooling control,
modern EC fans and integrated fan
control to reduce operating costs and
optimally adjust the fan speed to the
actual ambient conditions, infinitely
variable speed regulation through
thermal low-noise fan control for
particularly low noise emissions,
standard operating limits from -15GradC
to +45GradC, fully hermetic,
vibration-damped rotating-piston
inverter compressor for infinitely
variable adjustment of the compressor
frequency, with refrigerator oil
filling, refrigerant circuit made of
refrigerant copper pipe, hermetically
sealed and pressure tested at the
factory, dried and filled with R410A
safety refrigerant, controllable via
Schrader valve, High- and low-pressure
control device, filter dryer and
electronic expansion valve to increase
energy efficiency and improve control
quality, evaporator as refrigerant-water
heat exchanger as tube bundle heat
exchanger, vapour-diffusion-tight
insulation, return temperature range
from +10GradC to +20GradC, insulated
medium circuit with manual bleeder
valve, differential pressure monitor for
monitoring the volume flow, and
speed-controlled circulation pump
according to the specifications of the
Ecodesign Directive, medium connections
in solid design with one-inch female
pipe thread, internal control box with
terminal strip for mains power supply,
contact for external release and
potential-free contact for collective
fault signal, completely wired and
tested main and control circuit with
transformer, control fuses to protect
the device’s PCB, automatic restart
after power failure, modern touch
controller in IP54 splash-proof body for
operating the device and setting further
operating parameters, RS485 Modbus
interface as standard, clear display of
medium inlet and outlet temperature as
well as function display of fan,
compressor, required maintenance
interval and elementary faults, such as
high/low and differential pressure,
coded fault messages and display of all
operation-relevant control parameters
with password-protected access,
compliance with all requirements of the
Ecodesign Directive (EU) 2016/2281 (LOT
21) through optimized heat exchanger
surfaces, use of high-efficiency
components and optimisation of
operationally relevant system
parameters, protection class IPX4, power
supply 230 V AC, Sound pressure level
(distance 10 m free field) 37.3 dB(A),
sound power level 68.5 dB(A), adjustment
range, return temperature +10 to +20
GradC, operating range -15 to +45 GradC,
max. air volume flow 3900 cbm/h, note:
*air inlet temperature 35GradC dry bulb,
medium temperatures 7/12 GradC, 0%
glycol concentration
Cooling capacity: 4.7* (1.6-5.6) kW SEER: 4.57 Room cooling annual utilisation factor: 152 % max. electrical power consumption: 9.2 A refrigerant, basic quantity: 9.2 kg CO2 equivalent: 5.22 t nominal power consumption: 1.3 kW nominal current consumption: 5.6 A nominal flow rate, medium: 1.0 cbm/h weight: 120.00 kg *Lufteintritt 35GradC TK, Mediumtemperaturen 7/12 GradC, 0% Glykolkonzentration
Cooling capacity: 4.7* (1.6-5.6) kW SEER: 4.57 Room cooling annual utilisation factor: 152 % max. electrical power consumption: 9.2 A refrigerant, basic quantity: 9.2 kg CO2 equivalent: 5.22 t nominal power consumption: 1.3 kW nominal current consumption: 5.6 A nominal flow rate, medium: 1.0 cbm/h weight: 120.00 kg *Lufteintritt 35GradC TK, Mediumtemperaturen 7/12 GradC, 0% Glykolkonzentration
Documents
Technical documents
File type
Other
File type