|
GS LipuSmart-P-OAP NS 5,5,left
Item number 3555.86.32 Dimensions including packaging 3802 x 1130 x 1880 mm; 459.21 kg
Tender text
ACO LipuSmart-P-OAP NS 5.5 Grease
separator with integrated
lifting plant for indoor installation
consisting of:
Grease separator LipuJet-P-OAP NS 5.5
according to EN
1825-100
- of PE-HD
- inlet and outlet OD 160 mm
- zwei Abdeckungen Ø 450 mm mit
Spannverschlüssen
geruchsdicht verschlossen
- disposal line connection OD 75 mm with
Storz-B-coupling R
2 1/2“
- inspection window with wiper for
visual control
- automatically operation high pressure
pump with 360°
rotating high pressure spray head with
150 bars for
shredding, and mixing of content and
cleaning of inner walls
- automatically operation filling device
with solenoid valve
for operation of high pressure pump for
re-filling of grease
separator
- automatcially operated disposal pump
for lift heights
until ca. 12 meters, motor raiting: 3 kW
- one ventilation connection OD 110 mm
for ventilation of
both lifting plant and grease separator
Integrated sampling device and lifting
plant according to EN
12050-2
- collecting tank of polyethylene PE-LLD
- odour-proof inspection opening OD 450
mm with clamping
flange
Lifting plant according to EN 12050-2
Collecting tank of polyethylene PE-LLD
directly connected
with grease separator; Total volume 400
l and operation
volume: 235 l
Pressure connection
- backflow preventer with integrated
ball designed with
Y-pipe (with integrated screw for
ventilation and ball
fixation)
- attachment unit for flexible
connection of pressure pipes
with OD 108
- 114, 3 mm (optionally OD 88
- 90 mm with
separate available sealing ring)
- connection flange with shut-off valve
OD 90 mm PN 16
(optionally available)
Two pumping units
- motor rating: P2=3,0 kW
- three-phase motor 400 V, 50 Hz, 2900
rpm/min
- protection class IP 68
- horizontal erection for blockage-free
operation
- blockage-free free flow impeller, open
passage 60 mm
- flexible installation and connection
possibilities on site
- shut-off valve between tank and pump
sets optionally
available
- pneumatic switch system with air
bubble injection for
highest operation reliability of lifting
plant
System control device Multi Control
- case of plastics directly mounted at
grease separator
- dot-matrix display with condition
display and digital
potentiometer (rotary knob)
- level detection through sensor 4
- 20 mA
- rotary field control
- manual
- off
- auto function
- integrated real time clock with log
file function via
integrated SD card
- digital operations diary
- Bluetooth interface
- program start through key switch
- optimized disposal process through
defined levels
- counter for operation hours and
display of switch impulses
of all components
- integrated ampere meter
- automated switch over during pump
failure
- rechargeable battery-supplied alarm
(85 dBA, 5-6h)
- potential free signal for collective
fault and flooding
- display of servicing intervals
- integrated failure memory
- control with presets and multi-lingual
- operation current: 400V
- frequency: 50/60Hz
- protection class IP 54
- plug-in, with 3 meters cable and
CEE-plug (32 A) with
integrated phase changing switch
Operation side: left
Weight (empty): 439 kg Weight
(operation): 1869 kg
Technical data
Features
Nominal size 5.5
Sludge trap content 725 l
Fat storage content 360 l
Total content 1430 l
Installation site Freiaufstellung
Material PE
Type of fitting Withdrawal fitting
Nominal width 20 DN
pMin 2000 hPa
Vr value 0.20 l/s
Upper flow rate 13 l/min
Connections
Inlet STECK-NIPP-DN 100
Outlet STECK-NIPP-DN 100
Undefined STECK-NIPP-DN 100
Inlet R 3/4
Connection STECK-NIPP-DN 150
Connection STECK-NIPP-DN 150
Performance curve
Performance curve is loading...