|
GS LipuMax-PF-H-DA-NS10
Item number 3210.83.02 Dimensions including packaging 2800 x 1190 x 1800 mm; 257 kg
Tender text
ACO LipuMax-PF-H-DA NS 10
- FLEX
Grease separator NS 10 according to EN
1825-1 made of
PE-HD for underground installation
With direct suction and automatic
high-pressure interior
cleaning
Tank buoyancy-proof from the bottom of
the container up to a
height of 1,650 mm (all load classes)
with on-site concrete
slab (class A15/B125) or on-site load
distribution plate
made of concrete (load class D400)
Two dome openings, each for receiving
support rings with a
total height of max. 300 mm and covers
optionally according
to class A, B or D
Minimum inlet depth (ground level to
bottom of pipe): 900 mm
(use of covers without support rings)
Maximum inlet depth (ground level to
bottom of pipe): 1,200
mm (use of covers with support rings
with a total
construction height of 300 mm)
Disposal set DN 65
with 2 x PE couplings with compression
fittings on both
sides 90x75 mm
with Storz coupling 75 B blind coupling
2½"
Tank emptying via suction line to be
installed on site
Hydromechanical internal cleaning to
break up the fat layer
and effectively clean the tank 360°
cleaning over two axes
with high-pressure spray head
From stainless steel (only one cold
water connection
required)
- -
Automatic operation of the high-pressure
interior cleaning
over
Remote control (included):
-Nominal pressure: 175 bar
- Power: P1= 4.2 kW
-Flow rate: 11.6 liters/minute
including high-pressure pump unit and
filling unit for
installation in a frost-protected room
consisting of
magnetic valve, pressure reducer, dirt
trap and free-flow
valve, DVGW-certified/KIWA-approved, ¾"
connection
Inlet and outlet: OD Ø 160 mm
Ventilation connection: OD Ø 110 mm
Length x width x height: 2,520 mm x
1,160 mm x 1,920 mm
Maximum installation depth (measured
from the upper edge of
the cover to the lower edge of the
container, depending on
the add-on systems selected): 3,000 mm
Total volume: 2,090 liters
Fat storage capacity: 550 liters
Sludge trap volume: 975 liters
Empty weight: approx. 245 kg
Total weight filled: 2,355 kg
DoP: BD/G1/1024
Technical data
Features
Nominal size 10.0
Sludge trap content 1000 l
Fat storage content 550 l
Total content 2090 l
Installation site Erdeinbau
Material PE
Type of fitting Withdrawal fitting
Nominal width 20 DN
pMin 2000 hPa
Vr value 0.20 l/s
Upper flow rate 13 l/min
Connections
Inlet R 3/4
Connection STECK-NIPP-DN 150
Connection STECK-NIPP-DN 150
Performance curve
Performance curve is loading...