|
GS LipuLift-PF-B NS10-flex&SAT200
Item number 3210.30.03 Dimensions including packaging 3760 x 1160 x 1670 mm; 391.21 kg
€11,889.60 / Pcs
Tender text
ACO LipuLift-PF-B NS 10
- Hgeo max: 8 meters
- FLEX
Grease separator NS 10 according to DIN
EN 1825-1 and DIN
4040-100 made of PE-HD for underground
installation
with integrated duo pump station
according to DIN EN
12050-2, trade separation on request
Tank buoyancy-proof from tank bottom up
to a height of 1,650
mm (all load classes) with concrete slab
to be provided by
customer (class A15/B125) or concrete
load distribution
plate to be provided by customer (load
class D400)
Two dome openings, each to accommodate a
top piece with
covers optionally corresponding to class
A, B or D
minimum and maximum inlet depth depends
on the selected top
piece and load class
Cleaning and emptying of the tank by
opening the manhole
covers
Integrated sampling possibility
according to DIN 4040-100
via manhole cover segment pumping
station
Integrated pump station according to DIN
EN 12050-2
accessible via manhole cover
Pressure connection: diam. 90 mm (PE
pipe)
Ball check valve
Hgeo max. (recommendation) = 8 m
Power: P1= 2,03 kW, P2= 1,5 kW
Voltage: 400 V, 50 Hz,
speed: 2900 rpm
Protection class IP 68
Operating mode: S1
Open multi-channel impeller
Switchgear ACO Multi Control Duo for
pump control
LCD plain text display
internal acoustic alarm
High water alarm potential free
ATEX mode
electronic monitoring of motor current
Collective fault signal potential free
and potential bound
connection to remote control systems via
digital and analog
inputs and outputs
rotating field and phase failure control
(to be activated
via menu)
Runtime monitoring
Analog outputs 0-10 V and 4-20 mA
Error memory
housing size WxHxD: 320 x 300 x 120 mm
Operating voltage: 400 V
frequency: 50/60 Hz
Control voltage: 230 V/AC/50/Hz
Power consumption in idle mode: max. 10
VA
Temperature range: -20 to + 60°C
protection class IP 54
ready-to-plug-in pre-assembled
three-phase cable 5x4 mm2 and
CEE 32 plug with phase inverter
cable gland
inlet and outlet: OD Ø 160 mm
Ventilation connection: OD Ø 110 mm for
joint venting of
separator and pump station
Length x width x height: 3,750 mm x
1,160 mm x 1,670 mm
Maximum installation depth (measured
from the top edge of
the cover to the bottom edge of the
tank, depending on the
selected top systems): 3,000 mm
Total volume: 2,260 liters
Grease storage volume: 710 liters
Sludge collection volume: 1,010 liters
Empty weight: approx. 270kg
DoP: BD/G1/1012
Including operating key (ball valve
handle) 1735mm
Level measurement and 2 pcs. guide belts
to be ordered
separately:
- Level measurement: optionally via
pressure transducer
0178.63.87 or 0178.63.88 or dynamic
pressure bell incl. air
bubbling 0155.41.90
- Guide belt for pump removal 2x
0178.08.79
Technical data
Features
Nominal size 10.0
Sludge trap content 1010 l
Fat storage content 710 l
Total content 2260 l
Installation site Erdeinbau
Material PE
Connections
Inlet STECK-MUFF-DN 150
Outlet STECK-MUFF-DN 150
Undefined STECK-NIPP-DN 100
Connection STECK-NIPP-DN 150
Connection STECK-NIPP-DN 150
Performance curve
Performance curve is loading...