|
GS LipuLift-PF-DA NS7-flex&SAT150
Item number 3207.30.32 Dimensions including packaging 3260 x 1160 x 1670 mm; 519 kg
Tender text
ACO LipuLift-PF-DA NS 7 – Hgeo max: 8
Meter
- Flexibel
Grease separator NS 7 manufactured
according to EN 1825-1 of
PE-HD for below ground installation with
an
integrated duo pumping station according
to EN 12050-2,
trade separation on request
With connection for direct suction and
automated high
pressure cleaning
Container buoyancy-proof from the
container bottom up to a
height of 1,650 mm (all load classes)
with on-site concrete
slab (class A15/class B125) respectively
with a concrete
load distribution slab (load class D)
Two access openings, each for holding
support rings with a
total installation height of max. 300 mm
and covers
optionally according to class A, B or D
minimum and maximum inlet depth depends
on chosen top
section and type of load class
Disposal set DN 65
- with 2 x PE coupling with compression
fitting on both
sides 90x75 mm
- with Storz coupling 75 B
- blind coupling 2 1/2"
Separator emptying via suction line to
be installed on site
Hydro mechanical internal cleaning for
breaking up the fat
layer and effective container cleaning
360 ° cleaning via two axes with high
pressure spray head
Stainless steel (only one cold water
connection required) -
-
Automatic operation of the high pressure
interior cleaning
via remote control (included):
- Nominal pressure: 175 bar
- Power: P1 = 4.2 kW
- Volume flow: 11.6 liters / minute
Including high-pressure pump unit and
filling unit 3/4" for
installation in a frost-protected room
consisting of a
solenoid valve, pressure reducer, dirt
trap and free-flow
valve, DVGW certified / KIWA approved, ¾
"connection
Integrated sampling option via the
access cover in the
pumping station segment
Integrated pumping station in accordance
with EN 12050-2
accessible via an access cover
- Pressure connection: diam. 90 mm (PE
pipe)
- Ball backflow preventer
- Hgeo max. (recommendation) = 8 m
- Power: P1 = 1.54 kW, P2 = 1,14 kW
- Voltage: 400 V, 50 Hz,
- Speed: 2900 rpm
- Protection class IP 68
- Operating mode: S1
- Open multi-channel impeller
Without level measurement, level
measurement for pump
control must be carried out via ACO
pressure transducer(see
accessories).
Collective system control
- graphic dot matrix display with status
display and digital
potentiometer (rotary knob)
- Rotary field control
- H-0-A button
- Integrated real-time clock with
logbook function on
integrated SD card
- Digital operating diary
- Bluetooth interface for app-controlled
monitoring and
operation
- The cleaning program is started using
the key switch
- Operating hours counter and display of
the switch-on
pulses for all components
- integrated ammeter
- automatic switchover in the event of a
pump fault
- mains-independent alarm and battery
(85 dBA, 5-6h)
- Potential-free collective fault and
flood reporting
- Service interval display
- integrated error memory
- Controls preset and multilingual
- Operating voltage: 400 V
- Frequency: 50/60 Hz -
Protection class IP 54
- 1.5 m cable and CEE plug (32 A) with
integrated phase
inverter
Inlet and outlet: OD Ø 160 mm
Ventilation connection: OD Ø 110 mm for
joint venting of the
separator and pumping station
Length x width x height: 3,260 mm x
1,160 mm x 1,670 mm
Installation depth maximum: 3,000 mm
Total volume: 1,760 liters
Fat storage volume: 550 liters
Sludge trap volume: 780 liters
Empty weight: approx. 240kg
DoP: BD/G1/1012
Technical data
Features
Nominal size 7.0
Sludge trap content 780 l
Fat storage content 550 l
Total content 1760 l
Installation site Erdeinbau
Material PE
Type of fitting Withdrawal fitting
Nominal width 20 DN
pMin 2000 hPa
Vr value 0.20 l/s
Upper flow rate 13 l/min
Connections
Inlet STECK-MUFF-DN 150
Outlet STECK-MUFF-DN 150
Undefined STECK-NIPP-DN 100
Inlet R 3/4
Connection STECK-NIPP-DN 150
Connection STECK-NIPP-DN 150
Performance curve
Performance curve is loading...