|
GS LipuLift-PF-DAP NS4-flex&SAT100
Item number 3204.30.41 Dimensions including packaging 2800 x 1160 x 1670 mm; 500.94 kg
Tender text
ACO LipuLift-PF-DAP NS 4
- Hgeo max: 8 meters
- FLEX
Grease separator NS 4 according to DIN
EN 1825-1 and DIN
4040-100 made of PE-HD for underground
installation
with integrated duo pump station
according to DIN EN
12050-2, trade separation on request
With direct suction, automatic
high-pressure internal
cleaning and automatic disposal pump
Tank buoyancy-proof from tank bottom up
to a height of 1,650
mm (all load classes) with concrete slab
to be provided by
customer (class A15/B125) or concrete
load distribution
plate to be provided by customer (load
class D400)
Two dome openings, each to accommodate a
top piece with
covers optionally corresponding to Class
A, B or D
minimum and maximum inlet depth depends
on the selected
attachment piece and load class
Disposal set DN 65
with 2 x PE coupling with compression
fitting on both sides
90x75 mm
with Storz coupling 75 B
Blind coupling 2 1/2"
With integrated free-flow pump as
disposal pump,
Power: P1= 3.68 kW, P2= 3.0 kW
400 V/50 Hz/2877 rpm
Delivery head: H max. = 17.5 m Delivery
rate: Q max. = 17.8
l/s
Connection of disposal pump via suction
line to be provided
by customer
Hydromechanical internal cleaning for
breaking up the grease
layer and effective tank cleaning
360° cleaning via two axes with
high-pressure spray head
made of
stainless steel (only one cold water
connection necessary) -
-
Automatic operation of the high-pressure
internal cleaning
via
remote control (included in delivery):
- Nominal pressure: 175 bar
- Power: P1= 4,2 kW
- volume flow: 11,6 liters/minute
Including high-pressure pump unit and
filling unit 3/4" for
installation in frost-protected room
consisting of solenoid
valve, pressure reducer, strainer and
free-flow valve, DVGW
certified/KIWA approved, ¾" connection
Integrated sampling possibility
according to DIN 4040-100
via manhole cover segment pump station
Integrated pump station according to DIN
EN 12050-2
accessible via manhole cover
Pressure connection: diam. 90 mm (PE
pipe)
Ball check valve
HGeo max. (recommendation) = 8 m
Power: P1= 1,15 kW, P2= 0,88 kW
Voltage: 400 V, 50 Hz,
speed: 2900 rpm
Protection class IP 68
Operating mode: S1
Open multichannel impeller
Overall system control
graphic dot-matrix display with status
indication and
digital potentiometer (rotary knob)
level measurement via 4-20 mA sensor for
disposal process
Rotary field control
H-0-A push button
integrated real time clock with logbook
function on
integrated SD card
Digital operation diary
Bluetooth interface for app-controlled
monitoring and
operation
cleaning program is started via key
switch
efficient disposal program via defined
levels
operating hours counter and display of
switch-on pulses of
all components
integrated ammeter
automatic switchover in case of pump
malfunction
mains-independent alarm and battery (85
dBA, 5-6h)
potential-free collective fault and
high-water message
display of service interval
integrated fault memory
control preset and multilingual
operating voltage: 400 V
- frequency: 50/60 Hz
- protection
class IP 54
1.5 m cable and CEE plug (32 A) with
integrated phase
inverter
Inlet and outlet: OD Ø 110 mm
Ventilation connection: OD Ø 110 mm for
joint venting of
separator and pump station
Length x width x height: 2,770 mm x
1,160 mm x 1,670 mm
Maximum installation depth (measured
from top edge of cover
to bottom edge of tank, depending on
selected top systems):
3,000 mm
Total volume: 1,260 liters
Grease storage volume: 370 liters
Sludge collection volume: 590 liters
Empty weight: approx. 200kg
DoP: BD/G1/1012
Including operating key (ball valve
handle) 1735mm
Level measurement and 2 guide belts to
be ordered
separately:
- Level measurement: optionally via
pressure transducer
0178.63.87 or 0178.63.88
- Guide belts for pump removal 2x
0178.08.79
Technical data
Features
Nominal size 4.0
Sludge trap content 590 l
Fat storage content 370 l
Total content 1260 l
Installation site Erdeinbau
Material PE
Type of fitting Withdrawal fitting
Nominal width 20 DN
pMin 2000 hPa
Vr value 0.20 l/s
Upper flow rate 13 l/min
Connections
Inlet STECK-MUFF-DN 100
Outlet STECK-MUFF-DN 100
Undefined STECK-NIPP-DN 100
Inlet R 3/4
Connection STECK-NIPP-DN 100
Connection STECK-NIPP-DN 100
Performance curve
Performance curve is loading...