|
LP Muli-Mini MWP 1.2 230V/50Hz
Item number 1206.00.08 Dimensions including packaging 1200 x 800 x 850 mm; 42 kg
€2,968.61 / Pcs
Tender text
ACO Wastewater lifting station Muli-Mini
MWP 1.2
for faecal-free/fatty wastewater
tested according to DIN EN 12050-2
compact unit for above ground
installation
consisting of:
Collection tank made of polyethylene
with basic drain R1",
with connection for hand diaphragm pump
DN 50
with fastening set for buoyancy-proof
anchoring.
anchoring.
Inspection opening for easy maintenance,
ø 340 mm.
Tank dimensions (LxWxH): 815 x 600 x 850
mm
Adapted to minimum door dimension of 700
mm,
ergonomic carrying handles facilitate
transport, e.g. steep, narrow cellar
stairs.
Container design allows space-saving
corner installation.
Total container volume: 205 liters
Useful tank volume:
with inlet height 250 mm = 60 liters
with inlet height 400 mm = 108 liters
with inlet from above = 140 liters
Inlet pipe connection:
suitable for plastic
2 x horizontal inlets DN 100, inlet
height 250 mm
2 x horizontal inlets DN 100, inlet
height 400 mm
1 x vertical inlet DN 100, inlet from
above
Optional 1 x vertical inlet DN 50
(accessories)
Connection pressure line:
Special backflow preventer with ball in
housing
With lifting and fixing screw
Connection Rp 2"
Connection vent line:
Spigot DN 70
suitable for plastic or SML pipe
installed in the tank:
1 submersible waste water pump
Sat-VX 150 W
AC submersible motor,
protection class IP 68,
power: P1= 1,8 kW, P2= 1,1 kW
voltage: 230 V, frequency: 50 Hz
current consumption 8,2 A, 2900 rpm.
with mechanical seal,
with non-clogging free-flow
impeller,
grain size 50 mm.
Incl. pneumatic level control:
Pitot tube with pneumatic control
line.
Control MultiControl Mono
- Protection class IP 54
- ready to plug in, with 1,5 m cable and
Schuko plug
- potential-free collective fault and
operation signal
- mains-independent alarm and battery
(85dBA, 5-6h)
- numerical display with status
indication
- digital potentiometer for setting pump
1
ON and OFF, high water alarm, motor
current limitation
- level measurement and sensor
monitoring
- rotating field control
- H-0-A push button
- Display of service intervals
- Operating hours counter and display of
switch-on pulses
- ammeter
- simple error memory (last errors)
- control preset and multilingual
- With 230V connection for power supply
air bubbling
- Housing size WxHxD: 160x160x145 mm
(measured with cable gland)
Weight: 54 kg
Optional accessories:
6-kt double nipple 2" x 2" made of
stainless steel
Special fastening piece
Air bubbling