|
LP Muli-Mini MDP1.2 400V/50Hz
Item number 1206.00.06 Dimensions including packaging 815 x 600 x 850 mm; 45 kg
€3,056.46 / Pcs
Tender text
ACO Waste water lifting plant Muli-Mini
MDP 1.2
for grey water with faeces
test according to DIN EN 12050-2
Compact design for above ground
installation
consits of:
Collection tank made of polyethylene
with drain plug R",
with connection for diaphragm manual
pump DN 50
with fixation kit for operationally
secure
attachment.
Revision opening for simple maintenance,
ø 340 mm
Tank dimensions: (LxWxH): 815 x 600 x
850 mm
Adapted for a minimum installation
opening of 700mm
ergonomic carry handles allivate the
transport
e.g steep cellar stairs
Total Volume: 205 Litres
Usable Volume:
Inlet height 250mm: 60 Litres
Inlet height 400mm: 108 Litres
Vertical Inlet: 140 Litres
Connection Inlet:
Suitable for plastic
2x horizontal Inlets DN 100, Inlet
height 250mm
2x Horizontal Inlets DN 100, Inlet
height 400mm
1x Vertical Inlet DN 100
alternatively:vertical Inlet DN 50
(accessories)
Pressure line connection:
Special backflow preventer with ball in
housing
With lifting and fixing screw
Connection Rp 2",
the stress-free connection (pressure
line fastening)
as well as the sound decoupling
(e.g. by special fastening piece),
must be ensured,
Connection of vent line:
Spigot DN 70
suitable for plastic or SML pipe
installed in the tank:
1 submersible waste water pump
Sat-VX 150 D
three-phase submersible motor,
protection class IP 68,
power: P1= 1,5 kW, P2= 1,1 kW
voltage: 400 V, frequency 50 Hz
current consumption 2,6 A, 2900 rpm.
with mechanical seal,
with non-clogging free-flow
impeller,
grain size 50 mm.
Incl. pneumatic level control:
Pitot tube with pneumatic control
line.
Control MultiControl Mono
- Protection class IP 54
- ready to plug in, with 1,5 m cable and
CEE16- plug
- potential-free collective fault and
operation signal
- mains-independent alarm and battery
(85dBA, 5-6h)
- numerical display with status
indication
- digital potentiometer for setting pump
1
ON and OFF, high water alarm, motor
current limitation
- level measurement and sensor
monitoring
- rotating field control
- H-0-A push button
- Display of service intervals
- Operating hours counter and display of
switch-on pulses
- ammeter
- simple error memory (last errors)
- control preset and multilingual
- With 230V connection for power supply
air bubbling
- Housing size WxHxD: 160x160x145 mm
(measured with cable gland)
Weight: 54 kg
Optional accessories:
6-kt double nipple 2" x 2" made of
stainless steel
Special fastening piece
Air bubbling