|
LP Muli-Mini DDP1.1 400V/50Hz
Item number 1206.00.01 Dimensions including packaging 1200 x 800 x 1010 mm; 54 kg
€4,353.82 / Pcs
Tender text
ACO wastewater lifting station Muli-Mini
DDP 1.1 for
faecal-free/greasy waste water (after a
separator system), tested according to
DIN EN 12050-2
compact unit for above ground
installation
consisting of:
Collection tank made of polyethylene
with basic drain R1",
with connection for hand diaphragm pump
DN 50
with fastening set for buoyancy-proof
anchoring.
anchoring.
Inspection opening for easy maintenance,
ø 340 mm.
Tank dimensions (LxWxH): 815 x 600 x 850
mm
Adapted to minimum door dimension of 700
mm,
ergonomic carrying handles facilitate
transport, e.g. steep, narrow cellar
stairs.
Container design allows space-saving
corner installation, e.g. behind grease
separator.
Total container volume: 195 liters
Useful tank volume:
at inlet height 250 mm = 55 liters
with inlet height 400 mm = 100 liters
with inlet from above = 130 liters
Inlet pipe connection:
suitable for plastic
2 x horizontal inlets DN 100, inlet
height 250 mm
2 x horizontal inlets DN 100, inlet
height 400 mm
1 x vertical inlet DN 100, inlet from
above
Optional 1 x vertical inlet DN 50
(accessories)
Connection pressure line:
Special backflow preventer with ball in
housing
With lifting and fixing screw,
connection Rp 2",
the stress-free connection (pressure
line fastening)
as well as the sound decoupling
(e.g. by special fastening piece),
must be ensured,
Connection of vent line:
Spigot DN 70
suitable for plastic or SML pipe
installed in the tank:
2 submersible waste water pumps
Sat-VX 75 D
three-phase submersible motor,
protection class IP 68,
power: P1= 0,75 kW, P2= 0,55 kW
voltage: 400 V, frequency: 50 Hz
current consumption 1,3 A, 2900 rpm.
with mechanical seal,
with non-clogging free-flow
impeller,
grain size 40 mm.
Incl. pneumatic level control:
Pitot tube with pneumatic control
line.
Control system Multi Control
- Protection class IP 54
- Ready to plug in, with 1.5 m cable and
CEE plug (16 A)
with
integrated phase inverter
- Plastic housing for wall mounting,
dimensions 260 x 260 x
145 mm (WxHxD)
- potential-free collective fault and
operation signal
- mains-independent alarm and battery
(85dBA, 5-6h)
- numeric display with status indication
and -
digital potentiometer (rotary knob)
- digital potentiometer for setting pump
1 and 2
ON and OFF, high water alarm, motor
current limitation,
forced switching and forced activation
of the pumps
- Level measurement and sensor
monitoring
- rotating field control
- H-0-A push button
- Display of service intervals
- Operating hours counter and display of
switch-on pulses
- ammeter
- simple error memory (last error)
- automatic switch-over in case of pump
malfunction
- control preset and multilingual
- With 230V connection for air bubbling
power supply
The control box is
by 10 m pneumatic control cable
and 10 m motor cable with the lifting
unit
with the lifting unit
Weight: 66 kg
Optional accessories:
6-kt double nipple 2" x 2"
Special mounting piece
Air bubble