|
LP Muli-UF-MWP1 230V/50Hz
Item number 1203.00.00 Dimensions including packaging 759 x 745 x 637 mm; 37.97 kg
€2,930.32 / Pcs
Tender text
ACO Muli-UF MWP1
Wastewater lifting unit for the
collection and automatic
lifting of
sewage containing and free of faeces
above the backflow
level for
backflow level for installation in the
floor slab.
according to EN 12050-1
consisting of:
Collection tank made of polyethylene
with 3 horizontal inlet nozzles DN 100,
rotatable and height-adjustable
360 x 300 mm (adjustable in height
(height adjustability: 30-70 mm),
tileable cover plate with
integrated floor drain (incl. odor trap,
50 mm) and top piece 150x150 mm as well
as stainless steel
grate
stainless steel grate, load class K3,
inspection opening for maintenance: 330
x 250 mm
Tank useful volume = 27 liters,
total tank volume = 58 liters
Cutter pump
mounted in separate pump container made
of PUR,
mechanical seal,
Power: P2=0,6 kW,
voltage: 230 V, frequency: 50 Hz,
current consumption: 4 A, 2800 rpm,
permissible pumping temperature up to 40
°C
(briefly up to 60 °C),
Protection class: IP 67,
Hmax: 14,0 m,
Qmax: 8,0 m³/h
pneumatic level control:
Pitot tube with pneumatic control line.
Connection pressure line:
according to EN ISO 15493 made of PVC-U,
50-40-1 1/4",
integrated check valve
Connection vent line:
Spigot DN 50
Connection cable gland
connection piece DN 70
Control unit MultiControl Mono
Protection class IP 54,
ready to plug in, with 1,5 m cable and
Schuko plug,
plastic housing for wall mounting,
dimensions 260 x 260 x
145 mm (WxHxD),
potential-free collective fault and
operation signal,
mains-independent alarm and battery (85
dBA, 5-6 h),
numerical display with status
indication,
digital potentiometer for setting of
switch-on and
switch-off point
switch-off point, high water alarm,
motor current
limitation,
level measurement and sensor monitoring,
rotating field control,
H-0-A pushbutton,
Display of service intervals,
operating hours counter and display of
switch-on pulses,
ammeter,
simple error memory (last 3 errors),
control preset and multilingual,
with 230 V connection for power supply
air bubbling,
housing size WxHxD: 190x320x110 mm
(measured with
cable gland)
The control box is connected by 10 m
pneumatic control cable
and 10 m motor cable connected to the
lifting unit.
Tank dimensions (LxWxH):
740x740x(670-740) mm
weight: 47 kg
LGA test certificate: No. 7331293-07
DIBt approval: Z-53.2-489
When using an extension piece, the
enclosed flex hose must be exchanged for
part no.:
0150.57.82.
must be exchanged.g