|
LP Muli-Pro DDP 2.4 400V/50Hz
Item number 0175.13.26 Dimensions including packaging 3000 x 1000 x 1550 mm; 460 kg
€27,727.70 / Pcs
Tender text
ACO Muli-Pro 2.4 lifting system for
sewage containing faeces, for outdoor
installation with
sewer wheel
consisting of:
2 x polyethylene collection container
each with inspection openings LW 250 mm
with overflow or underflow DN 150
with connecting sleeve made of
polyethylene
with drain plug and 3 x connection
for hand diaphragm pump R 1 1/2".
1 set of fixing screws with
Washers and dowels for
buoyancy-proof anchoring
Container dimensions: each 1500 x 780 x
1035 mm (LxWxH)
Total tank volume: 1040 liters
Tank useful volume:
with inlet height 600 mm = 480 liters
with inlet height 750 mm = 610 liters
with inlet height 800 mm or from above =
660 liters
Supply line connection:
2 x inlet DN 150, inlet height 600 mm
2 x inlet DN 150, inlet height 750 mm
2 x inlet DN 150, inlet height 800 mm
2 x inlet DN 100 from above, inlet
height 1015 mm
2 x inlet DN 200/150 from above, inlet
height 1015 mm
suitable for plastic or SML pipe
Pressure line connection:
2 special backflow preventers DN 80
with drain screw
with Y-pipe with special fastening
piece for connecting the pressure line
DN 100
(outer tube diameter 108
- 114.3 mm)
Ventilation pipe connection:
2 connecting pieces DN 100
suitable for plastic or SML pipe
2 pump units consisting of:
three-phase motor, floodable
Power: P1= 6,71 kW, P2= 5,5 kW
Voltage 400 V, 50 Hz.
Speed: 1450 rpm.
Protection class IP 68
with 1 shaft sealing ring and
1 mechanical seal
with channel wheel
70 mm grain passage
incl. pneumatic level switch:
Pitot tube for ON-OFF alarm 1
with pneumatic control line
and micro compressor "air bubbling
(for the protection against swimming
media e.g. fatty wastewater).
Control Multi Control with soft start
- Protection class IP 54
- Ready to plug in, with 1.5 m cable and
CEE plug (32 A)
with
integr. phase inverter
- Plastic housing for wall mounting,
dimensions 290 x 380 x
150 mm (WxHxD)
- potential-free collective fault and
operating message
- mains-independent alarm and battery
(85dBA, 5-6h)
- numerical display with status
indication and -
Digital potentiometer (rotary knob)
- Digital potentiometer for adjusting
pump 1 and 2
ON and OFF, switch-on delay after power
failure,
High water alarm, motor current
limitation, forced
switchover and
Forced switch-on of the pumps
- Level measurement and sensor
monitoring
- rotating field control
- H-0-A Button
- Display of service intervals
- Operating hours counter and display of
switch-on pulses
- Ammeter
- simple error memory (last error)
- automatic switchover in case of pump
malfunction
- Preset and multilingual control
- With 230V- connection for power supply
Air bubbling
Item No.:0150.35.95
The switch box is connected to the
control unit by a 10 m
pneumatic control line
and motor cable are connected to the
lifting system.